background image

EN-42

Worldwide Guarantee

This entitles you to have the unit repaired free of charge, during the first five years after purchase, provided that it was 
originally purchased from a Certified JBL Synthesis dealer. The JBL Synthesis dealer is responsible for all after-sales service. The 
manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through 
unauthorized adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to 
or from the person claiming under the guarantee.

The warranty covers:

Parts (excluding disc drives) and labor costs for five years from the purchase date (see below for additional terms and 
conditions). After five years you must pay for both parts and labour costs.

Disc drives (of any type) are covered under this warranty for 

two

 years from the purchase date.

The warranty does not cover battery replacement at any time.
The warranty does not cover transportation costs at any time.

Claims under guarantee

This equipment should be packed in the original packing and returned to the dealer from whom it was purchased. It should 
be sent with shipping costs prepaid by a reputable carrier – 

not by the post office

. No responsibility can be accepted for the 

unit while in transit to the dealer or distributor and customers are therefore advised to insure the unit against loss or damage 
while in transit.
For further details contact JBL Synthesis at 

[email protected]

.

Problems?

If your JBL Synthesis dealer is unable to answer any query regarding this or any other JBL Synthesis product please contact JBL 
Synthesis Customer Support at the above address and we will do our best to help you.

On-line registration

You can register your product on-line at 

www.jblsynthesis.com

.

Содержание SDR-35


















































Отзывы: