5
Important notes
Connecting the Speakers and Power Cables
Before you wire your system, disconnect your boat battery's positive (+) cable.
This helps prevent damage in case of a short. When you complete the wiring,
reconnect the battery cable and test your marine stereo. When connecting your
marine stereo's black ground wire, be sure to connect the wire to a metal part of
your boat or preferably to the negative (-) terminal of the boat battery.
POSITIVE
CHASSIS
NEGATIVE
CHASSIS
Prior to the final installation, perform a sound check. If high distortion or intermittent
sound is experienced, it is possible that the wiring from the receiver to the boat's electrical
system is poor or that the battery needs recharging.
If the battery and its charging circuit are OK, then rewire the yellow fused wire of the
player directly to the positive terminal (+) of the boat battery.
Marine accessory shops stock the connector blocks and the 10 Amp cable that may
be necessary for extending the fuse wire connection.
Make sure that the black wire on the wiring harness is connected to a good ground
point on the boat. If the chassis of the boat is used as a grounding point, make sure
that the surface is scraped clean of paint before attaching the wire to it.
It is preferable to connect the black ground wire directly to negative terminal (-) of
the boat battery.
This model is only suitable for use in boats which have a Negative ground system,
e. g. : the negative terminal of the boat battery is connected to the chassis.
Grounding
Warning: polarity...
12
Disc Operation
4. Repeat play button (10)
Note:
5. Random play button (11)
Note:
6. Directory UP or Down button (12, 13)
Directory Search button (15)
Short push RPT button to play the current track repeatedly. Press and hold RPT for 2
seconds to play all the tracks in current directory repeatedly. Simply push RPT button
again to return to normal play mode.
The press and hold function is only available for MP3/WMA playing mode.
Short push RDM button to play all the tracks in the disc in a random sequence. Press
and hold RDM for 2 seconds to play all the tracks in current directory randomly. Simply
push RDM button again to return to normal play mode.
The press and hold function is only available for MP3/WMA playing mode.
Simply push the Directory UP or Down button to select the next or previous directory.
If it does not contain directories, it would play the track at 10- file when you push DIR-
button (12), and play the track at 10+ file when you push DIR+ button (13).
Press A.PS button (15) to enter Directory search mode, then turn TRK knob (5) to search
the directory upward or downward in one directory step. At your desired directory, press
A.PS button (15) to confirm your selection. Then search sub-directory and track by turning
TRK knob (5) and confirm by pushing A.PS button (15) until you select the track you
desired, push A.PS button (15) to play the track.
7. ID3 Display button (14)
8. Track Up or Down button (5)
9.
While a MP3 or WMA track is playing, pushing DISP button (14) repeatedly to display
the ID3 information in a sequence of:
TITLE --> FILE --> ARTIST --> ALBUM --> CLOCK --> ELAPSE TIME.
Turn TRK knob (5) clockwise or counter-clockwise to select the next or previous track.
Push TRK knob (5), it would display SEARCH ON, then turn TRK knob (5) clockwise
to go fast forward and turn TRK knob (5) counter-clockwise to rewind the track. At the
desired location, push TRK knob (5) once again, it would display SEARCH OFF and
begin to play the track.
