12
KX200
Section 3
Processing & Parameters
3.
HP shelf: Manipulates all frequencies above the set frequency.
•
Band Gain (-18 dB - +18 dB) - Sets the level of the selected EQ band.
• Band Frequency (20 Hz – 20K Hz) - Selects the center frequency, for each band, at
which the EQ gain or attenuation will be applied.
1.
PEQ Frequency Range: 20 Hz – 20K Hz
2.
Low Shelf Frequency Range: 20 Hz – 20K Hz
3.
High Shelf Frequency Range: 20 Hz – 20K Hz
•
Q (0.1 - 25.0) - This parameter adjusts the width of the PEQ filter. Lower values,
create wider EQ curves (covering a wider range of frequencies) and higher values create
narrower EQ curves (covering a much smaller range of frequencies for more surgical EQ
work). This parameter is only available in bands that are set to the ‘PEQ’ type, as listed
above.
•
EQ Bypass - This parameter is used for Music, Mic, ECHO, Reverb, Main, Center, Sub and
Surround. This option when turned on will set all the EQs for that input or output off
like it is flat.
•
EQ Enable: Activate the selected band.
•
EQ Delete: When turning on this option, it will delete the selected EQ.
When finished the EQ settings of channels, enable the L/R EQ, the left and right channels
parameter will be synchronized. The CH A/B link on microphone inputs is the same.
3.6 Sing Mode & Dance Mode
Sing/Dance Mode is used to switch between using the system in a dance environment (Dance
Mode) or for karaoke use (Sing Mode). When Sing Mode is turned on, the subwoofer can be
reduced for karaoke use. When Dance Mode is turned on, the subwoofer can be enhanced
for dance club use. This feature makes it very easy to use the live sound system for both
purposes.
Sing/Dance Mode can either be engaged manually or automatically. The Sing Mode Timer
allows you to automatically decrease ultralow frequency output after a period when the
microphones are not used.
Dance Mode Parameters
Dance Mode contains the following parameters:
•
Attack time (10 s - 600 s)
•
Boost Gain (0 dB - 12 dB)
Sing Mode Parameters
Dance Mode contains the following parameters:
•
Attack (5 ms - 2000 ms)
•
Release(0.2 s - 10 s)
•
Reduce Gain (-12 dB - 0 dB)
3.7 Driver Alignment Delay
Driver Alignment Delay is available on the Left/Right, Center Subwoofer and Surround outputs.
It is used to time align the signal from the various speakers so that all loudspeaker signals
Содержание KX200
