JBL KX100, Руководство пользователя

Страница: 28 / 68

24
KX100
Section 3
Processing & Parameters
3.15 Additional Output Parameters
There are some parameters which don’t necessarily pertain to any of the processing algorithms
previously listed, but do pertain to certain outputs. This sub-section covers these additional
output parameters.
• Center Volume (-30 dB - +6 dB) - This parameter allows you to adjust the volume of
the Center Output.
•
Center INI Volume (-30 dB - +6 dB)
- This parameter allows you to set the initial
Center Volume value. This is the default value that the Center Volume will be set to
each time the processor boots up.
• Center Max Volume (-30 dB - +6 dB) - This parameter allows you to set the absolute
maximum limit in which the Center Volume or Center INI Volume can be set.
•
Sub Volume (-30 dB - +6 dB)
- This parameter sets the overall volume of the Sub
Output.
• Sub INI Volume (-30 dB - +6 dB) - This parameter allows you to set the initial sub
Volume value. This is the default value that the Sub Volume will be set to each time
the processor boots up.
•
Sub Max Volume (-30 dB - +6 dB)
- This parameter allows you to set the absolute
maximum limit in which the Sub Volume or Sub INI Volume can be set.
• Crossover LRC Highpass (Off, 40 Hz-200 Hz) - This parameter sets the crossover
frequency, sending the higher frequencies to the Left, Right and Center Outputs. This
parameter can also be set to off, thereby bypassing the crossover.
•
Crossover Sub Lowpass (40 Hz-200 Hz, Off)
- This parameter sets the crossover
frequency, sending the lower frequencies to the Sub Output. This parameter can also be
set to off, thereby bypassing the crossover.
3.16 Utilities
The remaining parameters can be found under the Utilities menu and are described below.
Utility Parameters
The KX100 contains the following Utility parameters:
• Remote Input (Int, Ext) - This parameter selects the remote control source, whether
it’s the included JBL remote (Internal) or a third party remote control plugged into the
EXT Remote Input (External).
•
Contrast (1 - 16)
- This parameter adjusts the contrast of the LCD Display.
• USB Audio Trim (-12 dB - +24 dB) - This parameter adjusts the signal level going
from USB to the computer for recording purposes.
•
LR EQ Link (On, Off)
- When set to On, this parameter copies all Left EQ parameters
over to the Right EQ channel. Modifying any Left or Right EQ parameters when link is
set to On will adjust both Left and Right EQ channels.