JBL Ivx HP-DS170 Скачать руководство пользователя страница 21

21

201601/IvxHPIM_v1.2

JBL

®

 Intellivox HP series Installation Manual Rev 1.2

After installation and connection are complete, the 
installer should upload the settings file into the Intellivox 
with WinControl software. The upload procedure will verify 
the system’s correct operation.

This section of the manual describes the file upload 
procedure. It assumes that a laptop (or other computer) 
with both WinControl software and a driver for the RS-485 
interface already installed is available, together with the 
JBL (or other suitable) RS-485 interface. It also assumes 
that the installer has the settings files, prepared by the 
system designer, for each Intellivox loudspeaker making 
up the system. These may be elsewhere on the laptop’s 
hard drive, or may be supplied separately on removable 
media such as a memory stick or a CD-ROM. No previous 
knowledge of WinControl is necessary, but basic familiarity 
with Windows file handling is required.

A full description of WinControl is beyond the scope of 
this manual and further information is available in the 
application’s Help files. Instructions on how to install 
WinControl on a PC are included with the Program Set. 
Instructions on the use of the JBL RS-485 interface are 
included with the interface itself.

CONNECTING THE PC TO THE INTELLIVOX

The PC connects to the Intellivox via an RS-485 interface 
adapter.

A cable to connect the RS-485 interface adapter to the 
Intellivox’s RS-485 port will need to be assembled. Note 
that this is not supplied with the unit.

The RS-485 interface should then be connected to a USB 
port on the PC.

SETTINGS FILE UPLOAD

•   Apply mains power to the Intellivox, turn on the 

PC and launch WinControl. Open 

Options > 

Communications options

, confirm that the 

Off-line 

box is unchecked and that the correct COM 

port is selected. Close the 

Communication options

 

dialogue box. If the PC is connected to only one 
Intellivox, a screen similar to that shown below should 
now be displayed:

The green rectangle in the main pane represents the 
Intellivox. The model number is shown below and the 
unit’s current network address to the right. If a complete 
network comprising multiple Intellivoxes is being 
accessed, further similar rectangles will be displayed.

•   If the display does not look like that shown, click on 

Command > Netscan

 to force the PC to re-scan 

the network. This will be the case if the Intellivox(es) 
were unpowered when WinControl was launched. 
If this fails to produces the correct display, please 
check all network connections, and that the correct 
port on the PC is selected (open 

Options > 

Communications options

 to do this).

4. SYSTEM  CHECKS

Fig.21 WinControl.

Содержание Ivx HP-DS170



























Отзывы: