background image

2

201601/IvxHPDS_v1.2

JBL

®

 Intellivox HP series Installation Manual Rev 1.2

This document confirms that products manufactured by 
Duran Audio bearing the CE label meet all the requirements 
in the EMC directive 2004/108/EC and LV directive  
2006/95/EC laid down by the Member States Council for 
adjustment of legal requirements. Furthermore the products 
comply with the rules and regulations from 30 August 1995 
referring to the electromagnetic compatibility of devices. 
Duran Audio products bearing the CE label comply with the 
following harmonised or national standards: 

EMC:
EN 55103-1:2009 +A1:2012; E1, E2, E3
EN 55103-2:2009; E1, E2, E3

Safety:
IEC 60065:2001 (ed7) +A1:2005 +A2:2010

Insulation:
Class1

Duran Audio BV  
Koxkampseweg 10  
5301 KK Zaltbommel  
The Netherlands 

Tel: +31 418 515583  
Fax: +31 418 518077 

Zaltbommel, January 2016. 

USER’S NOTICE AND DISCLAIMER: 

No part of this manual including the software described in 
it may be reproduced, transmitted, transcribed, stored in a 
database system or translated without the express written 
permission of JBL Professional.

Documentation kept by the end user for back-up purposes is 
excluded from the above. 

All products and corporate names mentioned in this manual 
may be registered trademarks or copyrights of their respective 
companies. They are used here for indicative purposes only. 

The information contained in this manual has been carefully 
checked for accuracy; however no guarantee is given with 
respect to its correctness. JBL Professional accepts no 
responsibility or liability for any errors or inaccuracies that 
may appear in this manual or the products and software 
described in it. 

Specifications and information contained in this manual are 
subject to change at any time without notice.

© 2016 JBL Professional. All rights reserved.

REFERENCE TO EC STATEMENT OF CONFORMITY

Содержание Ivx HP-DS170



























Отзывы: