JBL EVOi.sys, Руководство пользователя

Страница: 14 / 36

INPUT CHANNEL
(continued)
PAN
The
PAN
control sets the amount of the channel signal feed-
ing the Mix L and R or Sub L and R busses (see
SUB
and
MIX
on the next page), allowing you to move the source
smoothly across the stereo image. When the control is turned
fully right or left you are able to route the signal at unity gain
to either left or right outputs individually. A mono sum of the
post-fader channel signal is also fed to the Mono output,
unaffected by the position of the
PAN
control.
MUTE
All outputs from the channel except inserts and pre-fade
direct outputs are active when the
MUTE switch is released
and muted when the switch is down, allowing levels to be pre-
set before the signal is required.
SUB
Pressing
SUB
routes the channel signal to Sub L and R busses.
The channel signal will be fed proportionately to left or right
depending on the position of the
PAN
control.
MIX
Pressing MIX routes the channel signal to Mix L and R busses.
The channel signal will be fed proportionately to left or right
depending on the position of the
PAN control.
11
10
9
8
12
M I X E R O P E R A T I O N
Phantom Power
(Master Section)
Wiring XLRs
Unbalanced Input
Balanced Input
Wiring Plugs
Unbalanced Input
Balanced Input
Insert
3
15
14
2
1
7
8
10
11
12
13
5
6
4
9
INPUT
CHANNEL
INPUTS
(Rear Panel)