JBG HT ZHHS-01-10K-R290-V5-M, Руководство по обслуживанию

Страница: 27 / 32

© JBG-HT (v.2.0)
27
SERVICE MANUAL – HEAT PUMP
Value : current value of ambient temperature probe 1
Offset : calibration of ambient temperature probe 1
Type : selection of the type of ambient temperature
probe 1 (default NTC)
External temp. sel. : selection between using ambient
temperature probe 1 or 2
Value : current value of ambient temperature probe 2
Offset : calibration of ambient temperature probe 2
Type : selection of the type of ambient temperature
probe 2 (default NTC)
External temp. sel. : selection between using ambient
temperature probe 1 or 2
Value : current suction pressure value
Offset : calibration of the suction pressure transducer
Type : selection of suction pressure transducer type
Min : minimum suction pressure value
Max : maximum value of suction pressure
Value : current value of discharge pressure
Offset : calibration of the discharge pressure trans-
ducer
Type : selection of discharge pressure transducer
type
Min : minimum discharge pressure value
Max : maximum discharge pressure value
Value : current value of the fan control voltage
Type : selection of fan control signal
Min : minimum value of the fan speed
Max : maximum value of fan speed
Value : current value of circulating pump control
voltage
Type : selection of circulating pump control signal
Min : minimum value of circulating pump speed
Max : maximum value of circulating pump speed
(Reverse logic) : YES/NO