1
2
13
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm
Side Tab
Side Tab
Filter Fixing Clips
Slide down (1) the side tabs on the front cover
of MSE to open it (2).
Extract the filter by pulling it out of the fixing cips.
Take a new filter and press it in place. Finally
close the front lid.
Tip Cleaning
Rod
Introduce the cleaning rod also
from the top side of the tip
Duct Maintenance
- To avoid clogging or pressure loss, it is necessary to carry on regular maintenance on the tips
and to be attentive to the condition of solder-collectors, gaskets and filters.
The inside of the tip should be periodically
cleaned with the largest possible rod. Choose
between the straight and helical cleaning rods
provided with the tool.
It is recomended to clean the tip also from its
top with the cleaning rod. Leave the tool in
horizontal position on the stand and remove
the solder collector to access to the top of the
tip.
- The module also has a filter that should be checked regularly to ensure right circulation of air through
the ducts and an appropriate pressure.
Module Filter Maintenance
It is recommended to close
the front lid by simultaneously
pressing against both upper
corners until a click is heard.