jbc DT530, Инструкция по эксплуатации, Страница: 11 / 16

2
1
11
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Fixing Screw
Heating Element
Tip
Solder
Collector
Suction Tube
Then pull out the heating element. Loosen the fixing screw.
Metal Bushing
Once the heating element is in the desired
position assemble it into the desoldering iron
handle (1).
Note:
Make sure that the heating element
is pushed all the way in. The metal bushing of
the handle should be aligned with the edge of
the heating element for a proper connection (2).
Left-hand / right-hand use:
“a” for
right-hand use
“b” for
left-hand use
The heating element has two assembling
positions, allowing the desoldering iron to be
used with either the right or the left hand.
For right-hand use, insert the pin into the hole
“a” and for left-hand use, into the hole “b”.
Place back the solder-collector with the suction
tube, and screw the tip onto the heating
element. Tighten the fixing screw.
Pin
Heat. Elem. Edge
Handle