jbc CDE-BA Series, Инструкция по эксплуатации

Страница: 6 / 20

ø 1
ø 1,5
ø 3,5
A A
B
B
C
A
Mark
Changing the Grips
Easily replace the Grips for T245-A and T245-C using the slip-on tabs (Ref. 0016057)
1. Inserting tabs 2. Inserting handle 3. Removing tabs
Quick Tip Changer
Put the slide-on tabs into the
new grip. Push the grip with the tabs
onto the handle. To remove the tabs, hold the
grip and pull. Use a pliers if
necessary.
Save time and change cartridges safely without switching the station off.
1. Removing 2. Inserting 3. Fixing
Place the handpiece in the
extractor and pull to remove
the cartridge. Place the handpiece on top
of the new cartridge and
press down slightly. Use the holes for fixing the
cartridge* as follows:
A. For straight C210.
B. For curved C210.
C. For C245.
tabs
new grip
Round Chisel Round-bent Bevel Special models
Compatible cartridges
The CD-B stations work with
C245 cartridges.
Find the model that best
suits your soldering needs in
www.jbctools.com
*Important
It is essential to insert the
cartridges as far as the mark
for a proper connection.
6