5
4
1
2
3
Insert the fi xing knob (3) and tighten it just enough
so that it stays in its place but the display holder
can be moved.
Quick Start
Connect the charging base to the mains (4).
If needed, the display can be connected to the
USB port (5) with the provided USB cable to keep
it charging while working.
4. Base Connection / Display Connection
3. Display Placing
Insert the thin end of the display holder into the
upper area of the rear rail of the charging base
(1). Then carefully rotate the display holder 90
degrees (2) until it stands vertical.
1. Display Holder Assembling
Place the display on the support with its buttons
facing upwards and adjust the height of the
display holder.
Once the display holder is at the right height,
tighten the fixing knob completely to fix the
display in place.
Buttons
Tablet
Holder
Support
Connector
for Display
2. Display Holder Setting
6
