Tip Cleaner
Select the option that best suits your needs and improve the tip thermal transfer.
CL0301
Wiper for B·IRON Charging Base
CL0301 includes an antisplash area that
prevents solder
particles from splashing onto the working area, keeping
the workplace clean.
It also includes a temperature-resistant wiper for
removing excess solder by gently tapping or wiping
the cartridge tip on it.
If the tip is very dirty, JBC recommends cleaning it first
with the wiper to remove excess solder and then with
the brass wool.
CL0300
Brass Wool for
B·IRON
Very effective
cleaning method.
Leaves a small layer
of solder on the tip
preventing oxidation
between cleaning
and rewetting.
Tap gently to remove excess solder.
Use the slots to remove remaining particles.
Wiper
Tapping
Wiping
Reference Mark
Reference Mark
*Inserting C210 Cartridges
Push the cartridges inside the handle until the
the reference mark is aligned with the edge
of the handle.
Reference Ring
Reference Ring
*Inserting C115 Cartridges
Push the cartridges inside the handle until the
reference ring rests against the sealing plug.
Holes
Depending on the shape of the tip, use the holes on the sides of the cartridge exchanger to
properly adjust the cartridge.
Important:
Push the cartridge in as far as it will go, making sure that it is firmly assembled*.
3. Fixing Cartridges
Cartridge Holder
for C210 Cartridges
The cartridge holder (4x slots) is used to
store cartridges. It allows to have different
cartridges quickly at hand and it works with
C210 Cartridges.
Cartridge Holder
Slots
Cartridge Adapters
for C115 Cartridges
Since C115 cartridges have a smaller diameter
than C210 cartridges, adapters must be used
to store them in the cartridge holder.
These adapters must simply be inserted from
above into the slots of the cartridge holder.
Cartridge
Adapter
14
