jbc B iRON 115T, Инструкция по эксплуатации

Страница: 14 / 20

Before carrying out maintenance, always extract the cartridge and disconnect de B·iRON from the
mains. Allow the equipment to cool down.
- Use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean the metal parts.
- Periodically check that the metal parts of the tool and stand are clean so that the charging works
properly.
- Maintain the tip surface clean and tinned before storage in order to avoid tip oxidation. Rusty and
dirty surfaces reduce heat transfer to the solder joint.
- Do not use liquid such as alcohol, thinner or benzene to clean the console.
- Repairs should only be performed by a JBC authorized technical service.
Maintenance
Clean
periodically
Clean
periodically
14