![background image](http://html1.mh-extra.com/html/jb-systems/led-fan-rgb/led-fan-rgb_operation-manual_3494368009.webp)
ENGLISH
USER MANUAL
JB SYSTEMS
®
7/9
LED FAN RGB
TEST
Used to check the LEDs and the motor
•
Press the [MENU] button until [
TEST
] is shown on the display.
•
Press [ENTER] to start the test
•
Press [ENTER] or [MENU] to exit the test mode
WHITE BALANCE
Used to set the white balance of the unit.
NOTE: This function is protected with a password to avoid that unauthorized people would mess up
the setting.
•
Press the [MENU] button until [
bALA
] is shown on the display.
•
Press [ENTER] to access the function settings
•
Use DOWN and UP buttons to go to value 240. This is the code to enter the real white balance settings
•
Press [ENTER] to confirm.
•
[bred] appears on the display
•
Press [ENTER] if you want to modify the settings of the red color
•
Use the UP and DOWN buttons to modify the intensity of the color
•
Press [ENTER] to save your setting.
•
You can now use DOWN and UP to go to the next color.
•
Press [MENU] to exit the settings
SOFTWARE VERSION
Used to check the software version that is installed in your unit
•
Press the [MENU] button until [
uer
] is shown on the display.
•
Press [ENTER] to check the information
•
Press [ENTER] or [MENU] to exit
OPERATING INSTRUCTIONS
A. Standalone 1unit:
•
Just connect the unit to the mains.
•
Select one of the automatic, sound or static modes
•
Refer to chapter HOW TO SETUP to learn how to make the settings.
B. Two or more units in master/slave setup:
•
Connect the units t
ogether. Refer to the chapter “electrical installation” to learn how to do this.
•
Select one of the automatic, sound or static color modes on the master (the first unit in the DMX chain)
•
Set all the other units in SLAVE mode
•
The slaves will now follow the program of the master unit so they all work synchronously.
C. Controlled by a universal DMX-controller:
•
Connect all units together. Refer to the chapter “Electrical installation for two or more units in DMX-
mode” to learn how to do this (don’t forget to address all units properly!)
•
Connect all units to the mains and turn on the DMX controller.
Since each unit has its own DMX-address, you can control them individually. Remember that each unit
uses 4, 8 or 11 DMX-channels, depending on the DMX-mode you have selected in the menu. See the
different DMX charts below:
4 channel DMX-Mode
Channel:
Value:
Function:
1
000-255
Red (0-100%)
RED
2
000-255
Green (0-100%)
GREEN
3
000-255
Blue (0-100%)
BLUE
4
000-127
Position
MOTOR
128-191
Clockwise Rotation (Fast > Slow)
192-255
Counter Clockwise Rotation (Fast > Slow)