JB Systems iMove 7S, Руководство по эксплуатации

Страница: 6 / 33

ENGLISH OPERATION MANUAL
JB SYSTEMS® 7/62 iMove 7S
Blackout Mode
Blackout mode: when no DMX-signal is detected, the unit goes in blackout and waits for the DMX-
signal.
No blackout mode: when no DMX-signal is detected, the unit automatically switches to standalone
mode.

Press the MENU button until is shown on the display.

Press the ENTER button, the display starts blinking.

Use DOWN and UP button to select (yes blackout) or (no blackout) mode.

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again.
Color Mode
Normal: only full colors can be selected.
Split colors: you can select full colors and 2 colors that are next to each other on the color wheel.

Press the MENU button unitl is shown on the display.

Press the ENTER button, the display starts blinking.

Use DOWN and UP button to select (normal) or (split color) mode.

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again.
Pan Inversion
Normal: Panning movement is not inversed.
Pan inversion: Panning movement is inversed

Press the MENU button until is shown on the display.

Press the ENTER button, the display starts blinking.

Use DOWN and UP button to select (normal) or (pan inversion) mode.

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again.
Tilt Inversion
Normal: Tilt movement is not inversed.
Tilt inversion: tilt movement is inversed

Press the MENU button until is shown on the display.

Press the ENTER button, the display starts blinking.

Use DOWN and UP buttons to select (normal) or (tilt inversion) mode.

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again.
Dimmer Inversion
Standard dimming: fader closed ( DMX value 000 )

full light output
fader open ( DMX value 255 )

blackout
Inversed dimming: fader closed ( DMX value 000 )

blackout
fader open ( DMX value 255 )

full light output

Press the MENU button up to when the is shown on the display.

Press the ENTER button so the display starts blinking.

Use DOWN and UP buttons to select the (normal) or (dimmer inversion) mode.

Once the mode has been selected, press the ENTER button to save it. ( or automatically return to the
main functions without any change after 8 seconds )
To go back to the functions without any change press the MENU button again.
ENGLISH OPERATION MANUAL
JB SYSTEMS® 8/62 iMove 7S
Led Display
Display on: display is always on.
Display off: display is off when not used.

Press the MENU button until the display shows .

Press the ENTER button, the display starts blinking.

Use DOWN and UP buttons to select (display always on) or (display off when not used).

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again.
Display Inversion
Display normal: display is readable when the unit is on the floor.
Display inversion: display is readable when the unit is mounted upside down.

Press the MENU button untill is blinking on the display. (normal display)

Use the ENTER button to change to the mode (display inversion), the option will be automatically
stored after 8 seconds. Or press the ENTER button again return to the mode (normal display).

To go back to the functions press the MENU button.
Focus Adjust
Used to help you adjusting the focus of the light beam and gobos.

Press the MENU button untill is blinking on the display.

Press the ENTER button so the unit goes to the “tilt 90°” position.

Press the ENTER button so the unit goes to the “pan 0°” position.

Press the ENTER button so the unit goes to the “pan 90°” position.

Press the ENTER button so the unit goes to the “pan 180°” position.

Press the ENTER button so the unit goes to the “pan 270°” position.
In the Previous 5 steps you are able to adjust the focus with the UP/DOWN buttons on the unit (the display
shows the current focus status).
Attention: please note that you can only set an “average focus” for all 5 positions, so it is not possible to set
the focus perfectly sharp for all directions.

To go back to the functions press the MENU button.
Self-Test
Used to activate the internal “self-test” program which shows all possibilities of the unit.

Press the MENU button untill is blinking on the display.

Press the ENTER button to start the internal self-test program.

To go back to the functions press the MENU button.
Fixture Hours
Used to show the number of working hours of the unit.

Press the MENU button untill is blinking on the display.

Press the ENTER button to show the number of working hours in the display.

To go back to the functions press the MENU button.
Reset
Used to force a reset of the unit.

Press the MENU button untill is blinking on the display.

Press the ENTER to reset all channels to their standard position.

To go back to the functions press the MENU button.
Please also check the chapter about the DMX-channel configuration of the unit to find out how you can force
a reset by DMX.