JB Systems DELUSION, Руководство по эксплуатации, Страница: 7 / 12

ENGLISH OPERATION MANUAL
JB SYSTEMS
5/8 DELUSION
mASt
Used to set the projector as slave in a master/slave setup.
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
SHnd
Used to change the effect in a stand-alone or master/slave setup.
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The effect can be changed.
•
Show 0: random show 1-8
•
Show 1: [Clouds]
•
Show 2: [Sky]
•
Show 3: [Water 1]
•
Show 4: [Water 2]
•
Show 5: [Water 3]
•
Show 6: [Inferno]
•
Show 7: [Fire]
•
Show 8: [Hallucination]
•
Press the [ENTER] button: the speed of the effect can be changed using the [UP/DOWN] buttons
SoUn
Used to activate the sound mode
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
SenS
Used to set the sensitivity of the microphone for sound mode
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
dmSt
Used to set the behavior when DMX is lost
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
•
[LASt]: hold the last received values
•
[mASt]: Master mode
•
[bLnd]: turn off the light source
Disp
Used to invert the display
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
Led
Used to turn off the menu display
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
Temp
Used to read the current temperature of the LED
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.
Fhrs
Used to read the active fixture time
•
Press the [MENU] button or [UP/DOWN] buttons until the desired function is showing on the display.
•
Press the [ENTER] button: The values can be changed.