JB Systems DELUSION, Руководство по эксплуатации, Страница: 10 / 12

ENGLISH OPERATION MANUAL
JB SYSTEMS
8/8 DELUSION
MAINTENANCE
•
Make sure the area below the installation place is free from unwanted persons during servicing.
•
Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
•
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
•
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
•
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
•
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
•
In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
•
The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
•
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates:
damp, smoky or particularly dirty surroundings can cause greate
r accumulation of dirt on the unit’s
optics.
•
Clean with a soft cloth using normal glass cleaning products.
•
Always dry the parts carefully.
•
Clean the external optics at least once every 30 days.
•
Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the current European
and national guidelines. Conformity has been established and the relevant statements and documents
have been deposited by the manufacturer.
Mains Input: AC 100-240V, 50/60Hz
Power consumption: 122W
Power connections: IEC input/output
DMX connections: 3-pin XLR male/female
Lamp: 100W Warm white LED
Beam angle: 80°
Fuse: 250V 2A slow blow
Sound Control: Yes
Size: see drawing
Weight: 3.8kg
The information might be modified without prior notice
You can download the latest version of this user manual on our website: www.jb-systems.eu