JB-Lighting P18 Wash, Руководство по эксплуатации

Страница: 27 / 32

- 27 -
P18 Wash
7.4 Cleaning the device
You should check the function of the fans in the head and
foot at regular intervals. Above all, make sure that the air
intakes and the interior of the P18 Wash are free of fluff
and dust.
To do this, open the head cover (4x camlocks (4) with half
a turn) and the base plate on the foot. You can clean the
P18 Wash with a brush and a vacuum cleaner. In addition,
you can remove the color insert (1) and the shutter slide
insert (2) by loosening the knurled screws (3) and sliding
the focus carriage towards the lens. Then you can clean
the colour filters and CMY panes with a soft cloth and a
little window cleaner. To clean the frost flaps and zoom/
focus unit, remove the three Phillips screws (Fig. 4) and
then the cover (see Fig. 5). Ensure that you do not bend
or damage any parts during cleaning. When cleaning is
complete, reconnect the flap, replace the Phillips screws
(4) and return the inserts to the unit.
(4) (5)
2
1
3
7.5 Software update
The P18 Wash can be updated via a USB stick with micro-USB connection. To do this, copy the
file directly into the root directory of the USB stick. Then press and hold the right key below the
display. Now insert the P18 Wash as soon as the message “Insert USB stick” appears on the
display and release the key. Now plug in the USB stick on the back of the device below the signal
connections and follow the instructions on the display. The P18 Wash completes the software
update with a reset. You will find the latest software on our homepage.
7.6 Testing of electrical equipment
According to the German Social Accident Insurance (DGUV) Regulation 3 / Regulation 4, electrical
systems and equipment must be subjected to regular inspections. The fixing screw of the DMX
5-pin socket can be used as measuring point for insulation and residual current measurement.
The screw is connected to all sheet metal parts via a contact washer.
PE measuring point