JB-Lighting P18 Wash, Руководство по эксплуатации

Страница: 26 / 32

- 26 -
P18 Wash
7. Service
7.1 Service menu
RESET FIXTURE
Upon the “Reset” command, P18 Wash will initialise to its initial values. It is the same procedure
as after switching on the P18 Wash. If an error message appears in the display, this could be the
first step to correct it.
ERROR LIST
The P18 Wash stores all occurring errors internally. An error message can have a harmless cause.
If you experience frequent error messages, please contact your dealer or the JB-Lighting service
department. All error messages are displayed with the respective frequency and can be deleted.
FUNCTION TEST
This function allows you to test all functions of the P18 Wash without using a light mixer. The
pan/tilt reset is deactivated in the process.
DMX TEST
This menu item is used to test the DMX input. Use the function keys to select the DMX channel
to be tested. The display shows the incoming value, at the same time the P18 Wash reacts ac-
cordingly.
INIT PAN TILT
The P18 Wash is calibrated in the pan/tilt position at the factory. If it loses this calibration, i.e. it
strikes against the stop or no longer finds its position, it can be re-initialised using this function.
This process takes about 3-4 minutes and ends with a reset of the spotlight.
DISPLAY CONTRAST
The contrast of the LCD display may change when the temperature is too high. In this menu item
the contrast can be adjusted.
RECEIVESOFT
This area can be used to import the software of the P18 Wash (see page 27).
Animation effects can be created via this channel in connection with the focus. Depending
on the intensity, the projection can be made to shake more or less. This effect can be dimmed
or switched.
6.5 Sparkle effect, sparkle speed
FINE ADJUST
To access the “Fine Adjust” menu area, press and hold the “ENTER” key and then confirm
by pressing the “ESC” key opposite.
Focus:
The focus is calibrated at the factory to ensure that all spotlights are focused at the same distance
with the same zoom. If a spotlight loses this calibration or if parts have to be changed for repair,
the focus can be readjusted after repair. For further details please contact your dealer or JB-
Lighting service department.
Apertures 1a, 1b, 2a, 2b, 3a, 3b, 4a, 4b:
The individual apertures are calibrated ex works to ensure that the opposite apertures of all deliv-
ered P18 Washs are just about closed at values of DMX 127.5. For further details please contact
your dealer or JB-Lighting service department.
Using the two channels autofocus distance and autofocus adjustment can be from Software Ver.
1.5 the focus over the entire zoom range automatically be readjusted.
6.4 Zoom, auto focus distance, autofocus adjust