Rev - D
Page 2 of 9
JAYPRO SPORTS
BBC-QS70, INDOOR QUICK SET-UP BATTING TUNNEL KIT
IMPORTANT NOTICE:
1)
DO NOT SET CAGE OR NET TOO CLOSE TO WALLS, COLUMNS, LOW CEILINGS
OR ANY SOLID OBJECT WHERE BALLS CAN STRIKE AND BOUND BACK. CAGE
OR NET SHOULD BE AT LEAST 4 FEET FROM ALL BYSTANDERS, CEILINGS,
WALLS OR SOLID OBJECTS.
2)
SPECTATORS MUST NOT STAND IN BACK OR NEAR SIDES OF CAGE OR NET
WHILE BEING USED FOR BATTING PRACTICE.
3)
ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE HAZARDOUS
AND RESULT IN INJURY. FOR REPAIR OR REPLACEMENT, CONTACT YOUR
DEALER OR JAYPRO SPORTS.
4)
CAUTION: DO NOT OVER TIGHT THE CABLES, AS EXTREME LOADING WILL BE
PLACED ON THE WALL OR END STRUCTURE.
PRODUCT DESCRIPTION:
The
BBC-QS70
, quick set-up batting tunnel kit is designed to attach to the walls of a gym. The
distance between walls should not exceed 120 ft and must be a minimum of 85 ft. During set-up the
net easily attaches to three (3) pre-installed polyester lines coming off of each wall. One wall will
have three fixed length lines, while the other wall will contain the hoisting lines.
There are six wall attachments that need to be made, three on each wall. Because there are many
different types of wall construction, additional wall anchors may be required depending on your type
of building. Six (6) 3/8” eyebolts are provided for basic wall anchoring. These eyebolts can be
directly installed in the metal building structure, existing wall blocking, or used in conjunction with
double expansion anchors, in solid concrete walls.
If attaching to standard CMU block or stud constructed walls, it is recommended that a wood
stringer wall mounting kit be used (model number
BBC-WLKT
), purchased separately. This kit
includes six (6) attractive polyurethane finished 24” long, 2” x 8” stringers and mounting plates that
are easy to install and help spread the load across multiple CMU blocks or other wall types. Studded
walls will required that internal blocking be installed to help provide anchor points and spread the
load across multiple studs.
An optional Supplemental Wall Hoisting Kit (BBC-QSKIT1) is available, that can provide added
flexibility on the end of the tunnel opposite the main hoisting lines. The kit can be used if the anchor
lines are too short to access from the floor, or to provide added tension if the hoist end is bottomed out.
