Rev - D
Page 6 of 9
3)
Make up and install the three fixed end lines. Based on the desired distance off the wall, cut
three equal lengths of 5/16” black braided rope and tie two snap hooks to each end. Attach
the three lines to the wall anchors.
Figure 4: Fixed End Support Lines
(Line Length Base on Desired Distance off the Wall)
4)
Make up and install the three hoisting lines. The approximate length of each line will equal
twice the distance off the wall, plus 25 ft. Tie one end of the rope to the bottom of the pulley
block and then pass it through the swivel pulley. Next pass the rope through the pulley black
and cam cleat, as shown in Figure 5. Attach the three hoisting lines to the wall anchors.
Figure 5: Hoisting Lines
(The Approximate Line Length Will Equal Twice The Distance Off The Wall, Plus 25 ft)
