Copyright ROMPA® Ltd
INTERACTIVE BASKETBALL SET 19211, KH 4.08
INTERACTIVE BASKETBALL SET 19211
USE
Supplies a positive reward whenever the basketball is successfully thrown into the hoop.
CONTENTS
1 x Interactive Basketball Set
1 x 9V square battery
DESCRIPTION
The small white rectangular sound effect box has a built-in proximity sensor that detects
presence of the basketball. One of several positive reward sounds, selected at random, plays
when the ball is successfully thrown through the hoop. This product requires 1 x 9V square
battery (included).
OPERATING INSTRUCTIONS
BATTERY INSTALLATION
1.
Slide open the battery compartment on the back of the sound effect box. You may need to
rotate the white saddle clamp 90 degrees in order to fully access the battery compartment.
2.
Snap the battery into the connector and insert the battery into the battery compartment.
Lay the battery wires on top of the battery and re-insert the battery compartment door.
ATTACHING THE SOUND EFFECT BOX TO THE FLOOR BASKETBALL HOOP
1.
Unscrew the two screws in the loop of the white saddle clamp. Remove the white plastic
loop.
2.
Place the white loop around the floor basketball hoop near to one of the legs.
3.
Screw the two halves of the white saddle clamp back together again, ensuring that the
sound effect box is leaning against one of the hoop legs with the rear black sensor
positioned above the hoop rim. In this position, the Rompa
®
logo on the label will be at the
top.
OPERATION
Once the battery has been installed and sound effect box attached to the basketball hoop, the
Interactive Basketball Set is ready for use.
Simply turn the ON/OFF (Volume) knob on the front of the sound effect box clockwise to turn the
box on and select the desired volume level.
TECHNICAL SPECIFICATION
Size:
111 x 83 x 38mm
Input:
1 x 9V square battery
SAFETY
1. Always supervise the use of this product.
2. The sound effect box is to be used in dry environments.
3. The ambient temperature should not exceed 40ºC.
