![background image](http://html1.mh-extra.com/html/jayco/kiwi-travel-trailer-2003/kiwi-travel-trailer-2003_owners-manual_3645346037.webp)
65
64
Operating the Refrigerator Controls – N611
(Kiwi Too, Option Kiwi 23B, 23D, 25E)
CONTROL PANEL
The refrigerator control panel is between the freezer compartment and the fresh food
compartment. To maintain the operating control functions of the refrigerator, a 12-volt
DC power supply is necessary. The refrigerator and any other DC components in the
vehicle receive DC power from the 12-volt system of the vehicle; either an auxiliary
battery, a converter, or the vehicle engine battery.
The selector switch starts (Fig. 5-6 - #1) and shuts down the refrigerator;
•
Push the selector switch to the AUTO position to start the refrigerator in auto mode.
•
Push the selector switch to the GAS position to start the refrigerator on propane gas.
The temperature switch (Fig. 5-6 - #2) controls the temperature adjustment of the freezer
and the fresh food compartment. The temperature adjustment that you select does not
change if the mode of operation of the refrigerator changes.
•
Push the temperature switch to the desired temperature setting.
•
The number “5” is the coldest temperature setting.
Refer to the “Display Codes” section of manufacturer’s owner’s manual.
AUTOMATIC MODE OPERATION:
When you select AUTO mode, the refrigerator controls automatically select the most
efficient energy source that is available for operation. If a more efficient energy source
becomes available, the refrigerator controls change from the current energy source to the
more efficient energy source.
The controls select the energy source in this sequence:
• When 120-volt AC is available to the refrigerator:
•
The ON light shows (Fig. 5-6 - #3) in the center display.
•
This means that the refrigerator is operating on AC electric.
• If 120-volt AC is not available to the refrigerator:
•
The ON light and the GAS light (Fig. 5-6 - #3 & #4) show in the center
display.
•
This means that the refrigerator is operating on propane gas.
Ignition – Propane Gas Operation
1. Open the valve at the propane gas storage tank.
2. Turn the thermostat (A) to the 5 position.
3. Turn the selector switch (B) to the propane gas position ( ).
4. Push and hold in the safety valve (C) for about five seconds.
• The refrigerator automatically ignites the gas at the burner.
1
WARNING: Do not hold in the safety valve for more than 30 seconds. If
there is no flame in this time, wait at least five minutes before you try
ignition again. If you continue to hold in the safety valve, gas will collect in the
burner area. This could cause a fire or explosion and result in dangerous
personal injury or death.
•
When a flame is present and the flame indicator (D) illuminates, release the
safety valve.
•
If the flame indicator does not illuminate, do this step again.
5. Turn the thermostat to the temperature setting that you wish.
Start Up – AC Operation
1. Make sure that 120 volts AC is available.
2. Turn the selector switch to the AC position (
).
3. Turn the thermostat to the temperature setting that you wish.
Start Up – DC Operation
1. Make sure that 12 volts DC is available.
2. Turn the selector switch to the DC position (
).
3. Turn the thermostat to the temperature setting that you wish.
Shut Down
1. Turn the selector switch to the OFF position (
).
Fig. 5-10
Содержание Kiwi Travel Trailer 2003
Страница 8: ...7 6 CHAPTER 2 OBTAINING SERVICE WARRANTY REGISTRATION S A M P L E S A M P L E...
Страница 53: ...97 96 NOTES LIMITED WARRANTY TRANSFER cont SAM PLE...
Страница 54: ...98 NOTES...