Jay electronique UC 323882G, Инструкция по установке и эксплуатации для пользователя

Страница: 80 / 164

DE
- 8 0 -
UC 323882G
EN FR
6- Commissioning and operation
6.1- Precautions when commissioning
• On reception of the product, charge the battery pack for 7 hours.
•
The installer must :
- ensure that the electronic key corresponds with the receiver,
- ensure that transmitter and receiver have the same radio channel,
- ensure that the radio channel chosen corresponds to the frequency plan set
up for the site,
- perform a final check to verify that the desired Button-Relay correspondence
is in place.
• During the previous check, the installer must check that when the «On/Horn»
button is pressed on startup, only safety relays are activated.
• Verify the priority general shutdown mode (remote control in operation) :
Active stop : When the stop palmswitch button on the transmitter is
pressed, receiver safety relays should instantaneously
change state.
Passive stop : When the electronic key is removed from the transmitter in
operation, receiver safety relays should change state within
two seconds max.
•
«Standby» function duration :
Check the effective duration of the "Standby" function (automatic shutdown of
transmitter) :
Start up the remote control and leave it without activating any control. Record the
time after which the receiver safety relays are deenergized and check that this
duration corresponds to the standard duration supplied (4min.)
or to the new
duration defined by a trained and authorized operator in accordance with the
procedure described in § 6.3.3.
•
Radio range limits :
In transmit mode, evaluate the range limit between transmitter and receiver (by
moving up to the range limit).