Jay electronique UC 323882G, Инструкция по установке и эксплуатации для пользователя

Страница: 84 / 164

DE
- 8 4 -
UC 323882G
EN FR
n°1 n°2
n°3 n°4
n°1 n°2
n°3 n°4
n°1 n°2
n°3 n°4
n°1 n°2
6.3.1 Procedure: "Locking-unlocking" access to
programming of transmitter UCE
1- Switch off the receiver.
2-
Insert the electronic key in the transmitter unit.
3- Holding buttons n°1, n°2 and n°3 pressed, unlock the stop palmswitch button
(fig.1).
4- Release the buttons.
Indicator lights statuses:
- transmitter
locked : red indicator light on, green indicator light off.
- transmitter unlocked : red and green indicator lights on.
5- Select «locked» or «unlocked» by pressing button n°2; the selected mode is
shown by the indicator lights (fig.2&3).
6- Validate the selected mode by pressing the "On/Horn" button (fig.4).
7- The transmitter saves the new mode in the electronic key and switches off the
indicator lights.
8- Exit the "locking - unlocking" configuration mode by pressing the stop palmswitch
button (fig.6).
Remark: If an operator attempts to program the frequency, the "Standby"
function duration or identity code with the transmitter locked, the
transmitter will indicate an error by its indicator lights which will flash
in alternation.
Locking Unlocking
n°1 n°2
n°3 n°4
DATA
Electronic
key
memory
Fig.1 Fig.2 Fig.3
Fig.4 Fig.5 Fig.6