7
Replacing the battery: remove battery cover on the back side of the
indicator according to arrows direction, and insert one alkaline battery
R9/6LR61 (9V) (not included), observing the correct polarity (+/-), and
then close the cover. Mount the alarm on a buzzer bar or bank stick.
Switch (9) ON indicator forward to select Night mode (
1
) or backward to
select Day mode (
2
).
Thread the fishing line over the roller sensor (2). A bite is indicated by
sound and flashing light (1) & LED strip (12) showing bite direction
(backward/forward).
To adjust volume press
„V” control button (3), sensitivity - press „S” button
(4), tone -
„T” button (6). Setup scale shows LED strip. Press button „R”
(5) to mute indicator for 20 seconds, until beep when device return to
standard mode.
To OFF indicator switch (9) in center position. There is also possible to
connect illuminated hanging indicators (not included) additionally using
plug (8) at the
indicator’ bottom.
Device has setup memory even when battery is out of unit.
Replacing the batteries: to remove batteries cover please open lid (E)
according to arrows direction, then insert 3 alkaline AAA 1,5V batteries
(not included) observing the correct polarity (+/-), and then close the
cover. To ON receiver press and hold ON/OFF button (B) about 2sec.
To adjust Volume press +/- (C) button. The lowest volume level activates
vibes mode. Bite is indicated by sound and led light (A) color according
to right indicator showing bite directions.
To OFF receiver press and hold ON/OFF (B) about 2sec.
BITE INDICATOR
RECEIVER
