Javad LGG100-GG, Руководство оператора

Страница: 54 / 92

54 LGG100-GG Operator’s Manual www.javad.com
O P E R A T I O N
Using MinPad
4
Using MinPad
The MinPad is a user simple interface used to display and control data input and
output (Figure 4-1)
STAT (status LED)
REC (recording LED)
PWR (power button)
FN (function/recording
button)
.
Figure 4-1. LGG100-GG MinPad
Power Key
Pressing the power key turns the receiver on and off.
Status LED
• When the receiver is on and no satellites are tracked, the STAT LED
will blink red.
• When satellites are tracked, the STAT LED will produce one blink for
each tracked satellite (green for GPS, orange for GLONASS).
FN Key and Record LED
Table 4-1 on page 55 summarizes FN key functions and REC LED statuses. See
“FN Key Mode parameter” on page 37 for information on setting FN key
modes.
• Pressing the FN key for less than one second switches the receiver
between different information modes (normal and extended informa-
tion), or between static and dynamic post-processing modes, depending
on the receiver’s configuration.
• During the first second of pressing the FN key, the REC LED is orange.
• Pressing the FN key for more than one and less than five seconds will
start/stop data recording.