43
The following procedure will describe how to install and update the PCI
bridge.
Step1. Check your Windows®95
Device Manager
, and find the question
mark showing the PCI Bridge.
Step2.
Insert Jaton’s mainboard CD into the CD-ROM drive, a “Welcome”
screen pops-up by autorun from Windows®95. Click on
PCI Bridge
bottom on that screen menu:
Step 3.
Click ‘Next’ to start.
Step 4.
Click on ‘Yes’ on License agreement dialog screen.
Step 5.
Click ‘Next’, then wait a while, until the installation complete screen
pops-up.
Step 6. Restart your computer, then check the
Device Manager
again. First,
you can check
Hard disk Controller
, make sure if the Bus Master
driver is recognized.
Step 7. Also check
System Device
, to verify if three devices are identified
them as well. If your screen just like one below, then the PCI bridge
driver is installed appropriated.
