26
CPU Level 1 Cache:
This item is used to Enable or to Disable the CPU level 1 cache.
When the cache is set at Disable, it is much slower, so the default
setting for this item is Enable. Some old and very bad programs will
make the computer malfunction or crash if the system speed is to
high. In that case, you should Disable this feature.
CPU Level 2 Cache:
This item is used to enable or to disable the CPU level 2 cache.
When the external cache is enabled, the system works faster. Th e
default is Enable.
CPU Level 2 Cache ECC Checking:
This item is used to enable or to disable the CPU level 2 cache ECC
checking function .
Quick power on self test:
After the computer has been powered on, the BIOS of the
mainboard will run a series of tests in order to check the system and
its peripherals. If the Quick power on self test feature is Enable, the
BIOS will simplify the test procedures in order to speed up the boot
process. The default is Enable.
Boot Sequence:
When the computer boots up, it can load the operating system from
floppy drive A:, hard disk drive C:, SCSI disk drive or CD -ROM.
There are many options for the boot sequence:
A, C, SCSI
C, A, SCSI
C, CD-ROM, A
CD-ROM, C, A
D, A, SCSI (at least 2 IDE HDD can be used)
E, A, SCSI (at least 3 IDE HDD can be used)
F, A, SCSI (at least 4 IDE HDD can be used)
SCSI, A, C
