37
Assign IRQ for PCI VGA :
You can assign IRQ for PCI VGA or not .
On Board FDD Controller:
This is to Enable or Disable the Onboard FDD Controller
.
On board Serial Port 1:
This is used to specify the I/O address and IRQ of Serial Port 1. Ten
options are available: Disable, 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4
or 2E8h/IRQ3.3F8h/IRQ10, 2F8h/IRQ11, 3E8h/IRQ10, 2E8h/IRQ11,
and AUTO.
On board Serial Port 2:
This is used to specify the I/O address and IRQ of Serial Port 2. Ten
options are available: Disable, 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4
or 2E8h/IRQ3. 3F8/IRQ10, 2F8/IRQ11, 3E8/IRQ10, 2E8/IRQ11, and
AUTO.
Onboard IR function:
Three options are available:
IrDA (HPSIR)mode.
ASK IR (Amplitude Shift Keyed IR)mode.
Disabled.
RxD , TxD Active:
Set IR transmission/reception polarity as High or Low.
IR Transmission Delay:
Set IR transmission delays 4 character-time(40 bit-time)
when SIR is changed form RX mode to TX mode.
On board Parallel Port:
Set the I/O address and IRQ of the onboard parallel port. Four
options are available: Disable, 3BCh/IRQ7, 278h/IRQ5 and
378h/IRQ7. Default is 378h/IRQ7.
Parallel Port Mode:
Can be set as ECP, EPP , ECP+EPP, or Normal (SPP) mode.
Default is Normal (SPP) mode.
