Jason International, Inc. •
501.771.4477
Page 1 of 12
Customer Service : 800.255.5766
“TO BE REMOVED FOR USE BY THE OCCUPANT.”
INSPECTION
Inspection of the unit prior to installation is the responsibility
of the installer. All components are factory assembled to the
bath and the unit is water tested and inspected prior to leaving
Jason International, Inc. If the carton shows sign of damage,
inspect the product before accepting and describe the problem
on the Bill of Lading.
Note:
Transportation and insurance
from Jason’s factory are the buyer’s responsibility.
Damage sustained in transit is the responsibility of the carrier. If
damage is discovered, the carrier must be immediately notified
in writing with a request for a representative to inspect the
unit. Failure of the carrier to respond should be reported to
the seller and carrier. Always file a freight claim promptly.
The installer is responsible for insuring that the unit is free
from defects or shipping damage. In the event of a problem,
DO NOT install the unit. Jason International is not responsible
for damage that might have been avoided by inspection or
testing prior to installation.
Damage to the unit during installation will not be covered
by warranty and is the responsibility of the installer. ALL
WARRANTY CLAIMS ON ACRYLIC SURFACE DAMAGE
MUST BE MADE PRIOR TO INSTALLATION. Inspect
OwNer’s MaNual
forma™ air-whirlpool Baths
INsTallaTION, OPeraTION, aND MaINTeNaNCe
49-1000-016
Date 04/08
Table 1 - Specifications
Jason International, Inc.
8328 MacArthur Drive
North Little Rock, AR 72118
www.jasoninternational.com
OwNer’s reCOrD
Dealer:
Date Purchased:
Date Installed:
Installer:
PlaCe serIal NuMBer CarD wITh
PrODuCT CONfIguraTION IN ThIs BOx
CAUTION: DO NOT LIFT OR HANDLE THE BATH BY ITS PLUMBING.
plumbing and bath surface for missing or damaged
components. Alert your dealer of any discrepancies.
To protect the unit from damage keep the bath in the carton
until ready for installation.
Model
Overall
Dimension
L x W x H (in.)
Operating
Capacity
gal
Blower
120v /
240v hP
Pump
120v /
240v hP
Min. Size
access
w x h
(in.)
floor
Loading
lbs/ft
2
AIR-WHIRLPOOL
AC630
72 x 36 x 22
45
1
1.5
36 x 17
56.7 lbs
AC635
72 x 42 x 22
56
1
1.5
36 x 17
52.9 lbs
CN550
60 x 60 x 22
66
1
1.5
36 x 17
51.9 lbs
DA500
60 x 60 x 20.5
55
1
1.5
36 x 17
49.5 lbs
RC630
72 x 36 x 22
50
1
1.5
36 x 17
52.5 lbs
RC635
72 x 42 x 22
58
1
1.5
36 x 17
52.9 lbs
RE525
60 x 30 x 20.5
38
1
1.5
36 x 17
61.6 lbs
RE527
60 x 32 x 20.5
39
1
1.5
36 x 17
59.5 lbs
RE553
66 x 36 x 22
47
1
1.5
36 x 17
55.2 lbs
RE630
72 x 36 x 22
53
1
1.5
36 x 17
54.1 lbs
