Jason International, Inc. •
501.771.4477
Page 5 of 12
Customer Service : 800.255.5766
BLOWER AND PUMP FEATURES
The Jason Signature Edition Air-Whirlpool bath provides both
an air bath and whirlpool bath system. The air bath system
includes a variable-speed, 1-Hp air blower with heater; and
three (3) massage modes: Continuous, Wave, or Pulse. The
whirlpool bath system includes a 1 1/2-Hp, 3 speed pump (240v,
20A), a 1-Hp secondary pump, an automatic 1.5kw heater,
and low water level and temperature sensors. An Ozone
Sanitation system is also provided and will be operated any
time the pump is powered. A built in timer shuts the blower
and/or pump off 20 minutes after being activated.
TOUCHPAD FEATURES
A main control touchpad mounted on the bath deck features a
LCD readout which alternately indicates the water temperature
(+/- 5°F) and whirlpool or air bath time remaining. The Signature
Edition touchpad allows the bather to control the blower,
pumps, LED mood light, and optional jetted neck pillows. A
built in timer shuts the pump and blower off 20 minutes after
being activated. A purge cycle will automatically start the
blower again for two (2) minutes, 10 to 20 minutes after the
bath has been shut off and completely drained. This should
be done in order to dry out the air channels. A daily purge can
also be set to turn the blower on at the same time everyday.
(See Operating the Signature Edition Air-Whirlpool Touchpad
on pages 8-9.)
REMOTE CONTROL FEATURES
In addition to the main control touchpad installed on the bath
deck, a floating, waterproof Universal remote Control is
provided with all Signature Edition Air-Whirlpools. This remote
control provides the same control functions as the bath’s main
control console, plus the bather may remotely operate a TV,
DVD, VCR, CD, etc. Refer to the Instruction Manual provided
with the remote control for detailed instructions.
SIGNATURE EDITION AIR-WHIRLPOOL
FEATURES OF THE AIR-WHIRLPOOL BATH
BLOWER AND PUMP FEATURES
The Jason Standard Edition Air-Whirlpool bath provides both
an air bath and a whirlpool bath system. The air bath system
includes a variable-speed, 1-Hp air blower with heater (120v,
15A) and three (3) massage modes: Continuous, Wave, or
pulse. The whirlpool bath system includes a 1 1/2-Hp, 1 speed
pump or two each 1-Hp, 1 speed pumps (120v, 20A); and a
low water level sensor. Individual built in timers will shut the
blower and pump off 20 minutes after being activated.
TOUCHPAD FEATURES
One main control touchpad mounted on the bath deck contains
several icons used by the bather to control the blower, pump,
and optional LED mood light. A built in timer shuts the blower
and pump off 20 minutes after being activated. A purge cycle
will automatically start the blower again for two (2) minutes,
15 minutes after the bath has been shut off. This should be
done in order to dry out the air channels.
STANDARD EDITION AIR-WHIRLPOOL
