Jason International, Inc. •
501.771.4477
Page 9 of 20
Customer Service : 800.255.5766
Copyright © 2018 Jason International, Inc.
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
LED Icon
The LED icon will operate the Chromatherapy
Mood Lighting system. The LED system will operate
for 2 hours before turning OFF.
•
A single press of the icon will turn the LED
Mood Light ON/OFF.
•
Press and hold the icon to cycle through the
available colors.
•
Order of Colors:
•
Color Step (changes each second)
• White
• Yellow
• Blue
• Red
• Green
• Purple
•
Slow Fade Mode
MICROSILK
®
Icon
The MICROSILK icon is used to activate the
MicroSilk unit and the 20-minute timer.
•
Once pressed, the microbubble generator
will start and “MS ON” will be displayed.
•
Pressing the icon again will shut the unit
OFF and “MS OFF” will be displayed.
•
Starting the MicroSilk unit will turn OFF any
other therapy equipment running at that
time.
AIRMASSEUR
®
Icon
The AIRMASSEUR icon is used to activate the
blower and the 20-minute timer.
•
CONSTANT Mode will start with the first press
and “CONST AIR” will be displayed.
•
WAVE Mode will start with the next press and
“WAVE AIR” will be displayed.
•
PULSE Mode will start with the next press and
“PULSE AIR” will be displayed.
•
Pressing the icon again will shut the blower
OFF.
•
Starting the AirMasseur will turn OFF any other
therapy equipment running at that time.
•
Once the system returns to Standby mode,
the purge timer will be displayed. After twenty
(20) minutes the blower will turn on for two (2)
minutes to allow the air channel to dry This will
be indicated with the “PURGE ON” display.
This purge cycle can be canceled by pressing
the holding the AIRMASSEUR icon for five (5)
seconds.
Blower SPEED Icon
The SPEED icon is used to increase or de-
crease the blower speed once the blower is ON.
•
Press and hold the icon to decrease the blow-
er speed until the desired intensity is reached,
then release.
•
Press and hold the icon again to increase
the blower speed until the desired intensity is
reached.
•
The LCD will display the blower speed from
“10” (Low) to “99” (High) while the icon is
pressed.
•
You can reduce the auto purge idle time from
20 minutes to 10 minutes, by pressing and
holding the icon for more than 5 seconds dur-
ing the purge idle period.
