JASON Hydrotherapy Designer AN-P Series Скачать руководство пользователя

Страница: 8 / 20

Jason International, Inc. •

501.771.4477

Page 8 of 20

Customer Service : 800.255.5766

FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)

SIGNATURE EDITION ELECTRONIC CONTROLS

ICONS

AIRMASSEUR Icon

MICROSILK Icon

LED Icon (Premier & Signature)

Blower SPEED Icon

SIGNATURE EDITION OPERATING INSTRUCTIONS

The Signature Edition digital touchpad mounted on the bath features an LCD readout which alternately indicates the water

temperature (+/-5°F) and time remaining. The control keypad features several icons used by the bather to control the

bath. This section will outline the functions of the system when a particular icon is pressed.

Unless otherwise indicated an ON/OFF function will take place with a single press on the button icon. Some functions may

require the use of a long press. A built-in timer shuts off the therapy equipment twenty (20) minutes after being activated.

Customized Settings

The 12-character LCD display can be customized by pressing the AIRMASSEUR® and SPEED icons simultaneously for

five (5) seconds while the system is off. Note: These icons will not be illuminated during this process. Use the SIGNA-

TURE EDITION ELECTRONIC CONTROLS chart to locate the icons. A menu will be displayed to choose the following:

Purge 24 (starts the blower every 24 hours for two (2) minutes at the time the purge was set), Product Test Diagnostics,

Temperature (°F or °C) and Language (English or Spanish).

Menu Instructions

Use the top AIRMASSEUR® icon to scroll through the different menu items. Use the Blower SPEED icon to change an

option. For example, press and release the AIRMASSEUR icon to change from Product Test to the Temperature option.

Press and release the SPEED icon to change the temperature display from Fahrenheit (°F) to Celsius (°C).

Product Test Diagnostics

After selecting the Product Test option from the menu, the unit will perform a series of tests to confirm correct installation

of components. The test will begin by displaying the configuration number, followed by the software revision number.

Next, the auxiliary control box will be tested to ensure proper IR communication. The display will then test the Tempera-

ture and Low Water level sensor (ITW-209). Next, each of the six (6) icon buttons will begin to light. Press the illuminated

button to proceed to the next icon. After the icon test, the equipment will start for two (2) seconds. Lastly, the LED light

units will be tested. If you receive an error on any of the tests, confirm proper installation of components to the correct

control box. (See CONTROL BOX CONNECTIONS section)

MicroSilk

[MS]

AirMasseur

[AM]

Содержание Designer AN-P Series





















Результаты поиска

Содержание Designer AN-P Series

Отзывы:

Похожие инструкции для Designer AN-P Series

Бренды по названию

Популярные бренды

JASON Hydrotherapy Designer AN-P Series, Руководство пользователя

Результаты поиска

Содержание Designer AN-P Series

Отзывы:

Похожие инструкции для Designer AN-P Series

Бренды по названию

Популярные бренды