Page 44
Gas check
Note:
1) To use "Inching" function, the master encoder shall be pressed and held; if the encoder is
released, the inching function will stop.
2) To use "Gas Check" function, press the master encoder once to start gas check, and press
it again to stop gas check; or the gas check function will automatically stop after 20s, to avoid
gas waste.
6.2.8 Settings
The "Settings" page is as shown in the following figure, which includes
"User Parameter
Setting",
"Unit System Setting",
"Language Setting" and
"Software Version
Information".
1. User Parameter Setting
For general parameters or options, please refer to the user parameter table of HD digital
screen in Section 6.1.4.
Содержание MIG 200 PFC
Страница 37: ...Page 37 SynMIG page MIG page...
Страница 74: ...Page 74 Appendixes Appendix 1 Wiring diagram Wiring diagram 1 MIG200PFC MIG250PFC...
Страница 75: ...Page 75 Wiring diagram 2 MIG250...
Страница 79: ...Page 79...