Page 25
a. Parameter display a
-
"Parameter display a" is used to display the current, welding speed, plate thickness and error
code.
1) When not welding, the preset value of current parameter will be displayed. If no operation
is performed for a long time, the default parameters are displayed.
2) When welding, the actual output current value is displayed.
3) When the factory settings are reset, the countdown is displayed.
4) When the barcode queried, the machine barcode is displayed.
5) When the product is not working correctly, an error code is displayed.
In Synergic MIG mode, MMA mode or Lift TIG mode, current is displayed by default. If
Synergic is disabled in MIG mode, the wire feed speed is displayed by default.
b. Parameter display b
"Parameter display b" is used to display the voltage, arc length, inductance/arc force, and
burn back time.
1) When not welding, the preset value of current parameter will be displayed. If no operation
is performed for a long time, the default parameters are displayed.
2) When welding, the actual output voltage is displayed.
The voltage is displayed by default in all welding modes.
c. Selection of welding mode
Before welding, press the "Welding Mode Selection" key
to switch among MIG, MMA
and Lift TIG, and select the corresponding mode based on the user's needs.
1) If the indicator
is on, it indicates that MIG/MAG mode has been selected.
2) If the indicator
is on, it indicates that MMA mode has been selected.
3) If the indicator
is on, it indicates that Lift TIG mode has been selected.
NOTE!
When the machine is in welding mode or the torch trigger is pressed, the
switching function is unavailable.
Содержание MIG 200 PFC
Страница 37: ...Page 37 SynMIG page MIG page...
Страница 74: ...Page 74 Appendixes Appendix 1 Wiring diagram Wiring diagram 1 MIG200PFC MIG250PFC...
Страница 75: ...Page 75 Wiring diagram 2 MIG250...
Страница 79: ...Page 79...