Installation
Integrating With a Cart
The Intelligent Charging System can be integrated with nearly any cart that meets the following
conditions. The power strips in the cart (up to four) must be able to be disconnected from the
timer/switch that is currently in the cart so that they can be diverted to connect directly with
the Intelligent Charging System. An existing auxiliary power strip may also be connected to the
appropriately labeled outlet on the Intelligent Charging System or an extra power strip may be
added for this purpose.
Mounted Inside of the Cart
Mounted on Top of the Cart
Installation Specifications
Installation procedures for the Intelligent Charging System vary depending on the environment
it is being used in.
For help or ideas for installation, contact JAR Systems directly.
To utilize
the included mounting bracket you will need four #6 (.1380) pan head self-drilling tapping screws
type CSD, cross-recess. The length required must be determined by the surface that it is to be
secured to. Be sure to leave enough space for the cables to extend from the back (at least 3.5”).
Always install the Intelligent Charging System in a ventilated space.
6.5”
2.5”
9.6”
5”
2.6”