Jaquet MultiTasker T601, Инструкция по эксплуатации

Страница: 30 / 73

Instruction Manual T601 JAQUET AG
Revision: 004
30/73
7.4 Configuration software
7.4.1 Configuration user and Process user
T601 parameters are divided into 2 groups, Configuration and Process parameters.
When the programme is started the window shows 3 levels one can log into, Config user, Process user or
Guest. Process and Configuration users require passwords.
A Guest has only the right to view measured data or print out actual parameters.
Process users may execute all of the functions that a Guest can do. In addition he is able to view or set
process parameters. Should a new file be loaded, only process parameters will be accepted (no configuration
parameters).
The Configuration user has full access and control over all parameters, Process as well as Configuration.
The factory settings are shown below
bold .
7.4.2 Log in
Here you can Log in on three different levels. The standard
passwords for Config- and Process- User are:
Config user password 1981
Process user password 1977
7.4.3 Main Window, Min-Max Values and System Limit Matrix
After successfully logging in, the main over view appears. Here one
sees the various I/O’s and status.
Listed on the left hand side are the various System Limit inputs.
System Limit status and alarm messages are to be found in the
middle. Shown on the right are all outputs status and output current
levels.
The measured Min-Max values are accessed via the button on the
left.
Actual measured values are shown alongside the Min-Max values for
sensor signals 1 & 2 and the analog input.
In the middle next to status is a further button through which an
overview of the System Limit matrix is accessed, showing the logical
status of System Limits, binary inputs etc.