Japan Radio Co. JUE-60KA, Инструкция по эксплуатации

Страница: 87 / 146

5-35 Section 5 Web Interface
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
No. Item Description
(3) GYRO Input Select the external GYRO input from the combo box.
Disable: Not used.
NMEA(4.8 kbps): Use serial (4.8 kbps) input.
NMEA(38.4 kbps): Use serial (38.4 kbps) input.
LAN: Use LAN input.
Note
Supported NMEA sentences:
・ VHW (Water speed and Heading)
・
HDT (Heading True)
・
THS (True Heading and Status)
To reflect the setting change, the equipment must be restarted.
(4) GPS Input Select the external GPS input to be used from the combo box.
Disable: Not used.
NMEA(4.8 kbps): Use serial (4.8 kbps) input.
NMEA(38.4 kbps): Use serial (38.4 kbps) input.
LAN: Use LAN input.
Note
To reflect the setting change, the equipment must be restarted.
(5) VDR Output Set whether remote maintenance data is output to VDR.
Disable: Not output
LAN: Output with LAN
Note
To reflect the setting change, the equipment must be restarted.
(6) Panel LED Set whether the LED panel of BDE is set to OFF forcibly.
When OFF is set, the LED panel goes off regardless of the
equipment status.
On: Not set to OFF forcibly (normally blinks).
Off: Set to OFF forcibly (LED goes off).
(7) Ethernet LED Set whether Ethernet LED set to OFF forcibly.
When OFF is set, the Ethernet LED goes off regardless of whether
the antenna is connected to the LAN port.
On: Not set to OFF forcibly (normally blinks).
Off: Set to OFF forcibly (LED goes off).
2
After setting, save/apply the setting by clicking on the [Set] button.