Japan Radio Co. JUE-60KA, Инструкция по эксплуатации

Страница: 50 / 146

Section 4 Setup 4-6
4.2 Setting external input of BOW
correction value, GYRO, and GPS
This section describes the external input setting procedures of BOW correction value, GYRO, and
GPS.
The BOW correction can offset the angle error from the bow. The FWD mark on the ADE should be in
the range of ±1.5° to ship's forward. If the ADE must be installed at an angle beyond this range, "FWD
from bow" must be set.
Carry out this setting by selecting [Settings] – [Antenna] menu of the Web interface.
For the Web interface use procedure, refer to “5.3”.
Notes
These settings are enabled by logging into the system under the ADMIN user.
The ADMIN user name under the factory default is “
ADMIN ” and the password is “ 000001 ”.
1
Select [Settings] - [Antenna] menu.
2
Set the following items.