Japan Radio Co. JUE-60GX, Инструкция по эксплуатации

Страница: 45 / 150

4-5 Section 4 Setup
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
5
The automatic satellite search (acquisition) function operates.
• JUE-60GX calculates the satellite position from the current position information that was
measured by GPS, automatically directs the antenna to the satellite direction, and acquires
the satellite.
• After acquisition, the antenna direction angle is automatically controlled so that the received
signal strength becomes the maximum.
• The LED indication at the front switches in the following sequence.
Searching satellite
Tracking satellite
Acquiring satellite
Completed satellite acquisition, tracking
From completion of CM start
G G
G G G G G G
G G
G G G G G
G
G
G G
G G G G G
G
G
G G
G G
G G G G G
G
G
G G
Notes
• When the LED indication is different from any of the above, an error is assumed. For
error indications and the meanings, refer to “F.1” and for error handling procedures,
refer to “Appendix E”.
• NET LED may not be lit in green for 10 minutes after power is turned on. This is due to
initialization, satellite search, and nework registration and does not mean a fault. It
may take 20 to 30 minutes until NET LED is lit in green depending on the status of the
wave propagation quality.
When the statellite search function fails, please consult with your distributor or JRC
sales office.