1 - 6
emVIEW-12T/D
(
User's Manual
) Introduction
©
Janz Tec AG
Rev. 1.3
1
Introduction
Janz Tec
AG’s emVIEW systems are an additional development. These HMI systems and industrial
display solutions are a combination of the familiar Janz emPC systems with a wide range of LCDs,
with or without touch-screen. Starting from 6.4
’’, the LCDs can be combined with emPC-A500 or
emPC-M as a complete HMI solution with smallest dimensions and power dissipation. EmVIEWs are
also available without touch-screen. The emVIEW-12T/D is a display only solution.
If a touch-screen is not needed contact Janz Tec AG for further information.
1.1
Features
Touch screen linked by RS232 or USB
Wake On Touch (with RS232, only)
DVI and VGA connectors
Small housing size
14
– 32 V DC power supply
Fan less cooling concept
Protection rating of the front is IP54
Fast and easy mounting
High grade aluminium front
Customizable design of the front panel
1.2
Functional Overview
EmVIEWs are normally delivered with a touch-screen. To use the touch-screen the emVIEW-12T/D
must be connected to a standard RS232 or USB port of a computer system e.g. an emPC and a driver
must be installed at the host.
The control of the resistive touch-screen is realized through a PenMount DMC9000. The resistive
touch-screen is realized through a 2.1mm thick glass panel with resistive surface. The PenMount
controller is linked to the RS232 port and USB port. If the USB port is used, the serial port is
deactivated.
The power must be supplied by an external power supply. This power supply must be capable to
provide enough power for the emVIEW-12T/D. Please refer to the technical specifications section for
more information.
