manualshive.com logo in svg

Janus PBX, Руководство пользователя

Поделиться
Скачать
Janus PBX Скачать руководство пользователя страница 7

To program location message, see step 8 in programming instructions. 

Enter 

# #

 and hang up.

PURPOSE:

 

To Enable Voice Prompt Message: (DEFAULT)

  

To enable the voice prompt message to say: 

“Elevator call at the tone 

press one to talk, press two for location”

.  

• Enter 

# 94851 or #9000000

 and listen for three beeps.  

• Enter 

# * 1180183 * #

 and listen for three beeps.  

• To program location message, see step 8 in programming instructions.  

• Enter 

# #

 and hang up.

List of Commands for *Programming Mode 

NOTE:

 The phone enters Programming Mode after completing step 2 

of the Programming Instructions.

• #0 First Phone Number *# 

• #1 Second Phone Number *# 

• #2 Third Phone Number *# 

• #3 Fourth Phone Number *# 

• #4 Identification Code *#

• #5 Programming New Password *# - Set Programming Access Code 

• #7 - Records Location Message  

• #8 - Plays back Location Message  

• #* 1 XXX Y W Z *# - setup code (Default is: #* 1 180 1 8 3 *#)

           • XXX - Call Timer [000,060-990], 000=Disable timer

           • Y - Push Button Control [0-2]

 

  [0] Push on = turn on/push again = play message

                  [1] Push on = turn on/push again = turn off

                  [2] Push and hold = turn on/release = turn off

                  [3-8] Push and hold to turn on for 

Y

 amount of seconds to make 

                          a call. If pushed for less than 

Y

 amount of seconds, turn 

                          off/push again = turn off

           • W - Unit ID [1-8]

           • Z - Voice Mode [0,3 or 5]

• **43 X *# - Ring Time (for outgoing calls) (18-60 range, 50 is default) 

• **44 X *# - AUX1 Behavior (0-2), 0 = disabled, 1 = red led, 2 = green led, 

                    3 = VCC mode  

• **45X*# - Redial, 0 = disabled (Default), 1 = Dial the number 1 more time, 

                  2 = Dial the number 2 more times. 

• **8 XX *# - Set Language (1 = English: default, 2 = Spanish, X= [1-2] 

                  (must have 2 digits)  

NOTE:

 **8XX*# will play both messages according to the order specified.

(Ex// **812*# = English then Spanish or **821*# = Spanish then English) 

NOTE:

 If second message is not used, enter ʻ0ʼ for that message. For

 

example, if you want to set to play English only you must program: **810*#.  

7

Содержание PBX












Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды