3.
Enter
# 0
(enter the first phone number to be programmed)
* #
. Listen
for three beeps.
EXAMPLE:
# 0 5551212 * #
.
NOTE:
If you are on a phone line that requires a “9” or another digit to
call the answering service, enter a
#
after the
9
. This will insert a four
second pause.
EXAMPLE:
# 09 # 5551212 * #
.
4.
Enter
# 1
(enter second phone number to be programmed)
* #
. (Optional)
5.
Enter
# 2
(enter third phone number to be programmed)
* #
. (Optional)
6
. Enter
# 3
(enter fourth phone number to be programmed)
* #
. (Optional)
7.
Enter
# 4
(ID Code)
* #
. (Optional)
8.
Enter
# 7
and listen for the single beep. At the beep, record the
location message by speaking into the touch tone phone handset or
into the microphone of the HFP phone when using the keypad to
program. Enter
0
to end. If you want to listen to the location message
without changing it, enter
# 8
.
9.
Enter
# * 1180183 * #
and listen for three beeps. (Enables voice
prompt messages)
10.
Enter
# #
to exit programming and hang up the phone.
Optional Programming Instructions
PURPOSE:
To Eliminate Autodialing:
To disable the dialer from dialing a phone number.
(Used on a ring down
telephone line)
• Enter
# 94851 or #9000000
and listen for three beeps.
• Enter
# 0 * #
, listen for three beeps, enter
# 1 * #
, listen for three beeps.
• Enter
# 2 * #
, listen for three beeps, enter
# 3 * #
, listen for three beeps.
• Enter
# * 1180180 * #
, listen for three beeps. (Optional)
• Enter
# #
and hang up.
PURPOSE:
To Disable the Voice Prompt Message:
To disable the voice prompt from saying:
“Elevator call at the tone press
one to talk, press two for location”.
• Enter
# 94851 or #9000000
and listen for three beeps.
• Enter
# * 1180180 * #
, listen for three beeps.
• Enter
# #
and hang up.
CAUTION:
This option cannot be used with two or more number dialing.
PURPOSE:
To Disable Voice Prompt Message and Delay Voice
Location Message:
To disable the voice prompt and have the location message play
automatically every 19 seconds.
• Enter:
# 94851 or #9000000
and listen for three beeps.
• Enter:
# * 1180185 * #
and listen for three beeps.
• Enter:
# #
and hang up.
PURPOSE:
To Enable Voice Prompt Message: (DEFAULT)
To enable the voice prompt message to say:
“Elevator call at the tone
press one to talk, press two for location”
.
• Enter
# 94851 or #9000000
and listen for three beeps.
• Enter
# * 1180183 * #
and listen for three beeps.
6
Содержание PBX
Страница 4: ...PC Board Diagram 4 ...
