2
1
Introduction
The UPS featured with Tower/Rack Convertible design, Single AVR Boost
and Single Buck, Pure Sine Wave Output, User’s Friendly LCD Display, Built-in
customer Option Slot, Hot Swappable Battery, and USB/RS232 Communication
interface, provides a flexible from factor for most of business critical file server,
minicomputers, network switches and hubs, etc. in tower or rack mount formats.
z
Sine Wave Output provides assurance of compatibility with all kinds of loads.
z
User’s Friendly LCD panel may display system status including load level,
battery level, AVR-Boost/Buck and fault status for easy service.
z
90% High Efficiency in Normal Mode meets high energy saving standard
and reduces noise and heat generated by other topology UPS.
z
Easy Swappable Battery Function may save the time and money by
swapping the batteries by end-user without sending it back for a factory
service.
z
Cold Start Function enables to turn on the UPS without connecting to the
Utility.
z
Optional Communication Software allows not only the control of the UPS
and graceful shutdown when the Utility Fails, but also allows the user to
remotely test the major operating functions of the UPS, communicate via
SNMP/web/network optional card, access UPS functions via the web and
alert users via SMS messages against specific events.
z
User-friendly Plug and Play design can easily be installed by end user. All
units up to 3KVA are supplied with input cables and output sockets as
standard.
z
Plug-and-play USB/RS232 interface conveniently offers a plug-and-play
USB or RS232 port for connecting with nowadays IT products.
3
2
IMPORTANT SAFETY INSTRUCTION
2.1
An Important Notice
1. The UPS has its own internal energy source (battery). Should the battery
be switched on when no AC power is available, there could be voltage at
the output sockets.
2. Make sure that the AC Utility outlet is correctly grounded.
3. Do not open the case, as there are no serviceable parts inside. Your
warranty will be void.
4. Do not try to repair the unit yourself; contact your local supplier or your
warranty will be void.
5. Please make sure that the input voltage of the UPS matches the supply
voltage.
6. To eliminate any overheating of the UPS, keep all ventilation openings free
from obstruction, and do not store "things" on top of the UPS. Keep the
UPS 30 cm away from the wall.
7. Make sure the UPS is installed within the proper environment as specified.
(0-40
℃
and 30-90% non-condensing humidity)
8. Do not install the UPS in direct sunlight. Your warranty may be void if the
batteries fail.
9. Install the UPS indoors as it is not designed for installation outdoors.
10. Dusty, corrosive and salty environments can do damage to any UPS.
11. Install the UPS away from objects that give off excessive heat and areas
that are excessively wet.
12. If liquids are split onto the UPS or foreign objects dropped into the unit,
the warranty will be null and void.
13. The battery will discharge naturally if the system is unused for any length
of time.
