TIGER
BELT-SANDER FOR WOODEN FLOORS
ED 95
PG.
6/16
INSTRUCTION MANUAL
MACHINE SAFETY INSTRUCTIONS
The following information highlights potentially dangerous conditions for the operator and/or machine. Read
this manual carefully in order to become familiar with the machine. Learn to know when these conditions may
occur. Set all the safety devices on the machine. Take all necessary measures in order to train the staff who will
use the machine. Immediately report damage to the machine or incorrect operation.
1. Keep hands and clothing away from rotating parts.
2. Keep hands on the handles when the machine is running.
3. Do not let go of the machine when the motor is running.
4. Do not run the machine with the belt and abrasive belt guards open.
5. Always run the machine with the dust bag in place.
6. Do not remove the dust bag while the motor is running.
7. Always disconnect the power supply cable before starting maintenance operations.
8. The machine must always be carried with care, since each single part in which the machine can be
dismantled is extremely heavy
9. Always use the machine in a well-ventilated area.
10. Always handle dust from sanding correctly (see page 3).
INTRODUCTION AND MACHINE CHARACTERISTICS
ABRASIVE BELT DIMENSIONS
750 X203 mm
ROLLER WIDTH
200 mm
ROLLER DIAMETER
185 mm
ROLLER SPEED AT 50 Hz
AT 60 Hz
1800/2000 rpm
2000/2200 rpm
MOTOR ( A12 ) EUROPEAN
( A11 ) USA
230V 50 Hz 2990 W
230V 60 Hz 3000 W
CONTROL LEVER
OPERATED FROM THE HANDGRIPS
LEVEL CONTROL
BY MEANS OF CAM ON ONE WHEEL
SAFETY MOTOR PROTECTION
HEAT CUTOUT - IN THE CASE OF POWER FAILURE,
THE MOTOR DOES NOT RESTART WITHOUT
MANUAL RESET
WHEELS
DIAM. 112 AND 87 mm REPLACEABLE
BEARINGS
LIFELONG LUBRICATED RADIAL BEARING
ROLLER PRESSURE ADJUSTMENT
CONTINUOUSLY ADJUSTABLE
MACHINE DIMENSIONS
1045x382x980 mm
NET WEIGHT
85 Kg
PACKAGE DIMENSION
760x536x830 mm
GROSS WEIGHT
95 Kg
STANDARD EQUIPMENT
DUST BAG, ELECTRIC PLUG, USE KEYS, USE AND
MAINTENANCE MANUAL
