background image

TIGER

BELT-SANDER FOR WOODEN FLOORS

ED 95

PG. 

5/16

INSTRUCTION MANUAL

DANGER

:

Carrying out maintenance operations, replacing or adjusting belts, or
replacing the dust bag may cause injury to the operator and/or surrounding
people if the machine is connected to the power supply.

 WARNING:

Serious injury or damage may occur if all the instructions on this machine or
in this manual are not read and complied with. Read and abide by all safety
instructions. Make sure that all the plates, transfer printings, warnings,
cautions and instructions are fixed to the machine. New plates may be had
from your authorized JANSER retailer.

 WARNING:

Clouds of sanding dust may form and be breathed in while the sanding
machine is being used. Always wear a dust mask when using the machine for
sanding.

WARNING:

The eyes and/or body may be injured if protective clothing or devices are not
worn. Always wear safety glasses, protective clothing and a dust mask during
any sanding operation.

WARNING:

During sanding operations, loud noises may occur which may damage
hearing after long exposure. Always use acoustic protection during any
sanding operation.

CAUTION:

 Injury or damage may occur if maintenance and repairs are carried out by
unauthorized staff.

CAUTION:

Injury or damage may occur if the machine is used to move other objects or if
it is moved on a slope. The machine must be used exclusively for sanding dry
wooden floors which are flat or have a maximum slope of 2%. Do not use the
machine to sand steps or pieces of furniture. Do not ride the moving machine.

CAUTION:

Damage may be caused to the machine if it is not kept in a dry building when
not in use. Store the machine in a dry building.

CAUTION:

Since the machine is heavy, disconnect the motor before moving it

CAUTION:

Serious damage may be caused to the surface being worked if the machine is
left running on the spot while the roller is in contact with the surface. In order
to avoid damaging the surface, always approach the cutting line delicately.
Do not stop while the roller lowers or rises, but always move at a constant
speed.

Содержание Tiger

















Отзывы: