Janser PM-1600, Руководство по эксплуатации

Страница: 11 / 15

OPERATING MANUAL
11
Chisel-Stripper
PM-1600
3 OPERATION
3.3 Start up
When putting the machine into operation, the machine must stand evenly
on both wheels and the chisel must rest on the ground. DO NOT TIP
MACHINE AS LONG AS IT IS!
Make mains connection!
The electrical connection must match the information given on the rating
plate. Check device, cable, plug and socket for damage.
Before working in old buildings, the subfloor must first be checked for
stability! Danger of damage due to the resulting vibrations of the device.
Wear ear protection!
Always wear protective goggles when working with the machine;
Protective gloves; Wear strong and non-slip protective shoes and
protective mask!
Switching on / off takes place via the control box on the guide handle.
The switch box is equipped with an ON / OFF switch and
equipped with an emergency stop switch.
1) ON / OFF switch (BLACK BUTTON)
ON - ON - START
OFF - OFF - STOP
2) EMERGENCY STOP switch (RED BUTTON)
When the mushroom pressure switch is pressed,
the power supply to the drive motor is interrupted
immediately.
Restart: Release the lock by TURNING.
Undervoltage release
A built-in undervoltage release instantaneously cuts off power when e.g.
the fuse falls out, power fluctuations occur or a cable is damaged.
1.)
2.)