Janser PM-1600, Руководство по эксплуатации

Страница: 9 / 15

OPERATING MANUAL
9
Chisel-Stripper
PM-1600
3 OPERATION
3.2 Preparation
ALWAYS PULL OUT THE MAINS PLUG
BEFORE ADJUSTING!
CHOICE OF TOOLS
The insert tool depends on the floor covering to be
worked.
The detachment capacity depends on the working
angle and the feed speed.
There is no chisel that can do "ALL"!
They are always well advised by our experts.
(Chisel see chapter 2.4)
TOOL INSERTION / REPLACEMENT
FIGURE A-
Lay the machine on the guide bar
sideways on the floor.
FIGURE -B-
Turn the chisel fixation 180 ° with one hand,
and use the other hand to pull the chisel
out of the HEX-21 guide.
Hold the NEW chisel UP with the locking
surface and guide, insert the chisel into the hexagon.
FIGURE C-
Now turn the chisel back and check
that the chisel is in place.
-A-
-B-
-C-